Locked
Factory settings, no undervolt or overclock.
ComfyUI benchmark · nvidia-smi every 500 ms · November 11–12, 2026
Three ComfyUI workflows, four RTX 3060 setups and the RTX 5050 as the baseline, measured down to the watt. What unlocking the 3060 buys you, and where it stands against the 5050.
On the stock profile (170 W), the 3060 runs its fans at full speed, locked or unlocked: 84 to 99% locked, 91 to 99% unlocked. On the optim profile, locked or unlocked, they stay at 71 to 76%, against 53 to 70% for the 5050.
The setups tested
Each 3060 setup combines two choices: locked or unlocked, and the stock profile (170 W) or the optim profile (minimum power limit of 102 W with a +250 MHz core clock offset). The 5050 runs at 130 W and is the baseline throughout this page.
Factory settings, no undervolt or overclock.
Optim profile: power limit at its minimum (102 W) and +250 MHz core clock offset.
Unlocked, factory settings and stock 170 W limit.
Unlocked, same optim profile: 102 W and +250 MHz offset.
Conclusion
Each cell shows the gap with the 5050 on the same workflow. Blue means the 3060 does better than the 5050; red means it does worse.
Unlocked optim uses less energy than the 5050 on all three workflows, stays around 70 °C and only loses time on LookSheets. Unlocked at 170 W is the fastest on Z-Image and MiniMax, at the cost of 80 to 83 °C and fans at full speed. The locked 3060 on the stock profile has no upside: unlock it at the very least.